1) Create a 6x6 room
2) Make it as high as you want your staircase to be.
3) Add 1 piece of flooring to the corner of the 2nd floor
room.
4) Use the connecting stairs to join that level to the ground
5) Repeat the process, moving to a new corner of the room on
each floor.
6) Create a building to join your staircase to, and you are
done!
You can even remove the walls around
the stairs, to create a more open feel.
PS. This pic was
made by using external programs... you cant do a slide in TS2 yet. :(
Advanced
Circular Stairwells |
1) Create a block of foundation 2) Raise the terrain near it FOUR times. 3) Drag another piece of foundation from the top of
the hill to the bottom, so that you now have 2 pieces of
foundation
a square apart, with one piece being twice as tall as the
first. 4) Raise the terrain again, but this time do it EIGHT times instead of four. 5) Again, create a piece of foundation. 6) Flatten the ground 7) Now simply make a little 1x1 room. 8) Add flooring 9) Remove walls 10) Use connecting stairs 11) Repeat 12) Add walls to each floor 13) Add floors 14) Again, use connecting stairs 15) Finish it off 16) Remove the walls, and the stairwell is done! 17) If you want to make it indoors, you will have to make the
room 5x5. You will not be able to make it 3x3, unless you are very
proficient with using the building cheats. Also, you have to do each wall individually. Shift-dragging
will not
work. 18) Add a building so that the stairs lead somewhere, and you
are done! Alternate
Circular Stairwell Method They will both produce similar results, so use the one that
you find
easiest. 1) Use connecting stairs 3 times to dig into the ground 2) Hold down CTRL and delete the stairs. 3) Create 1x1 rooms at each level of the ground, and add
flooring. 4) Delete the walls, but leave the floors 5) Flatten the ground 6) Use the connecting stairs, and then follow on from step 12
of the
previous tutorial. |
There hasn't been any comments yet, be the first to post one!